Closed GeM tenders from PMO in Jharkhand for Hand - Operated Chain Pulley Block (V2) as per IS 3832

2,024 open now and 8,227 closed on record from PMO. Closed bids, most recently closed first.

0 tenders · page 1 of 1

Browse by category

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (7)
Electronic Weighing Scales (4)
Digital Multimeter (3)
Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (3)
Antivirus Software (2)
Galvanized Steel Sheets (Plain and Corrugated) (V2) as per IS 277 (2)
Helicoverpa Lure (2)
LED Tube Light (Retrofit Type) (2)
Online UPS (?10 KVA) With Battery Conforming To IS 16242 (Part 1) (2)
Respiratory Protective Devices- Filtering Half Masks (2)
Stable Bleaching Powder for Treatment of Water Intended for Drinking (V3) conforming to IS 1065 (Part 2) (2)
true rms clamp meter (2)
Unitary Air Conditioner (Window AC) (V3) ISI Marked to IS 1391 (Part 1) (2)
Welding Cable ISI Marked To IS 9857 (V2) (2)
XLPE Cable for Working Voltage up to and Including 1.1 KV Marked To IS 7098 (Part 1) (2)
0.5 Inch G.I. Nipple 3 Inch long both side male threaded,0.5 Inch G.I. Nipple 5 Inch long both side male threaded,3 by 4 Inch G.I. Nipple 3 Inch long both side male threaded,3 by 4 Inch G.I. Nipple 5 Inch long both side male threaded,1 Inch G.I. Nipple 5 Inch long both side male threaded,1 Inch G.I. Nipple 6 Inch long both side male threaded,1 Inch G.I. Nipple 8 Inch long both side male threaded,2 Inch G.I. Nipple 5 Inch long both side male threaded,2 Inch G.I. Nipple 6 Inch long both side male threaded,2 Inch G.I. Nipple 8 Inch long both side male threaded,2.5 Inch G.I. Nipple 8 Inch long both side male threaded (1)
0.63 KVAR, Air Core Dry Type indoor series reactor confirming to IS: 5553 Part III (1)
1- Body, MOC- C.I. With SS316 Cladding, Part No. 1,2- Head Drive End, MOC- C.I. With SS316 Cladding, Part No. 2-1,3- Head Idle End, MOC- C.I. With SS316 Cladding, Part No. 2-D,4- Cone Idle End, MOC- CI FG GR 260, Part No. 4-1,5- Cone Drive End, MOC- CI FG GR 260, Part No. 4-D,6- Packing Gasket Head and Body, Part No. 7,7- Packing Gasket Head and Cone, Part No. 8,8- Packing Rope - GLAND, Part No. 17 19sq. x 650mm long,9- Slinger, Part No. 21,10- Check Ball - DE and IE Head, Dia. 75 and Dia 63,11- Oil Seal-IE and DE Housing, MOC- STD, 1set-2Nos, Part No. 18,12- Oil Seal-DE Outer Cover, MOC- STD, Part No. 18-A,13- Shaft, MOC- EN8, Part No. 5,14- Shaft Sleeve, MOC- SS-304, 1set-2Nos, Part No. 22,15- Rotor, SG IRON 500-7, Part No. 3,16- Fasteners Head-Casing, Head-Cone, Bearing Cover, Gland (1)
1- Cast iron gate gate valve as per specification size - 1.5 inch NB,2- Cast iron gate valve as per specification size - 2 inch NB,3- Cast iron gate valve as per specification size - 2.5 inch NB,4- Cast iron gate valve as per specification size - 3 inch NB,5- Cast iron gate valve as per specification size - 4 inch NB,6- Cast iron gate valve as per specification size - 6 inch NB,7- Cast iron gate valve as per specification size - 8 inch NB (1)
1- Cast iron gate valve as per specification, Size - 2 inch NB - 50 mm,2- Cast iron gate valve as per specification, Size - 2.1by 2 inch NB - 65 mm,3- Cast iron gate valve as per specification, Size - 3 inch NB - 80 mm,4- Cast iron gate valve as per specification, Size - 4 inch NB - 100 mm,5- Cast iron gate valve as per specification, Size - 6 inch NB - 150 mm,6- Cast iron gate valve as per specification, Size - 8 inch NB - 200 mm (1)
1- Connecting Rod Bronze Bushing In connecting Rod on Front Rake Hanger Shaft,2- Reach Rod Rear and End Bronze Bushing,3- Rear Rake Hanger Bronze Bushings In Rear Rake Hanger on Rear Rake Hanger Shaft,4- Rear Rake Hanger Bronze Bushings In Rear Rake Hanger on Rear Rake Hanger Box Shaft,5- Eceentric Hub with Crank one RH,6- Rear Link one LH,7- Connecting Rod without Bushes,8- Rear Rake Hanger,9- Rear Rake Hanger Box,10- Connecting Rod Bearing Cover Outside cover and Inside Cover,11- Bush block Near Sprocket For Rake Classifier (1)
1- Container Sump, Part No- 1004001200,2- Set of control and Isolation Valve HP, Part No- 101500014,3- Set of sensor and switches HP, Part No- 1035000400,4- Temperature Controller, Part No- 10230005,5- Control Panel, Part No- 1041501230 (1)
1- Gumboot Half, Size No. - 5,2- Gumboot Half, Size No. - 6,3- Gumboot Half, Size No. - 7,4- Gumboot Half, Size No. - 8,5- Gumboot Half, Size No. - 9,6- Gumboot Half, Size No. - 10 (1)
1- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 6mm,2- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 8mm,3- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 10mm,4- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 12mm,5- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 14mm (1)
1- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 125 NB,2- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 150 NB,3- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 200 NB,4- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 50 NB,5- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 65 NB,6- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 80 NB,7- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 100 NB,8- Operating Diaphragm for S2K weir type Diaphragm Valve - 50 NB,9- Operating Diaphragm for S2K weir type Diaphragm Valve - 65 NB,10- Operating Diaphragm for S2K weir type Diaphragm Valve - 80 NB,11- Operating Diaphragm for S2K weir type Diaphragm Valve - 100 NB,12- Operating Diaphragm for S2K weir type Diaphragm Valve - 150 NB (1)
1- Pipe S.S. - 316L, 0.5 inch 15 NB, SCH. 40S, ASME B36.19M,2- Pipe S.S. - 316L, 3by4 inch 20 NB, SCH. 40S, ASME B36.19M,3- Pipe S.S. - 316L, 1.5 inch 40 NB, SCH. 40S, ASME B36.19M,4- Pipe S.S. - 316L, 2 inch 50 NB, SCH. 40S, ASME B36.19M,5- Pipe S.S. - 316L, 3 inch 75 NB, SCH. 40S, ASME B36.19M (1)
1- Pressure Guage, Dial Size - 4 inch, range 0 to 10 Kg per cm square as per technical specification attached.,2- Pressure Guage, Dial Size - 4 inch, range 0 to 20 Kg per cm square as per technical specification attached.,3- Pressure Guage, Dial Size - 4 inch, range 0 to 40 Kg per cm square as per technical specification attached.,4- Pressure Guage, Dial Size - 4 inch, range 0 to -760 mm Hg as per technical specification attached.,5- Pressure Guage, Dial Size - 4 inch, range 0 to 7 Kg per cm square as per technical specification attached.,6- Pressure Guage, Dial Size - 4 inch, range 0 to 250 Kg per cm square as per technical specification attached. (1)
1- Set of pump Assembly LP Part No. - 00400050,2- Set of Strainers and Filter LP Part No. - 00500YTF,3- Set of Divider Manifolds HP Part No.-00400010,3- Set of Divider Manifolds LP Part No.-004000250,4- Set of Tubing, Fitting and Hoses LP, Part No.- 0080010015,5- Set of Pressure and Tempreture Indicator LP Part No.-00200020126 (1)
1- Spare Rubber Diaphragm for KB type striaght through Diaphragm Valve, Size -80 NB,2- Spare Rubber Diaphragm for KB type striaght through Diaphragm Valve, Size -100 NB,3- Spare Rubber Diaphragm for KB type striaght through Diaphragm Valve, Size -150 NB,4- Spare CI bonnet for 80 NB KB type straight through CIRL diaphragm valve,5- Spare CI bonnet for 100 NB KB type straight through CIRL diaphragm valve,6- Spare CI bonnet for 150 NB KB type straight through CIRL diaphragm valve,7- Spare CIRL valve body for 80 NB KB type straight through diaphragm valve,8- Spare CIRL valve body for 100 NB KB type straight through diaphragm valve,9- Spare CIRL valve body for 150 NB KB type straight through diaphragm valve (1)
1- Spares for 7.5 H.P Jyoti Pump, Model - 40UH3A2, Impeller, MOC - Cast Iron,2- Spares for 7.5 H.P Jyoti Pump, Model - 40UH3A2, Stuffing box cover, MOC- Cast Iron,3- Spares for 7.5 H.P Jyoti Pump, Model - 40UH3A2, Stuffing Box Seal, MOC - Rubber,4- Spares for 7.5 H.P Jyoti Pump, Model - 40UH3A2, Water Deflector, MOC - Rubber,5- Spares for 7.5 H.P Jyoti Pump, Model - 40UH3A2, Mechanical seal, MOC- AI alloy,6- Spares for 7.5 H.P Jyoti Pump, Model - 40UH3A2, Shaft sleeve, MOC - Bronze (1)
1- SS316L Bend, Seamless, Sch 40, Butt weld fittings as per ASME B16.9, R-1.5D, 90 Drgree, Size- 25NB, Wall thickness - 3.38mm,2- SS316L Bend, Seamless, Sch 40, Butt weld fittings as per ASME B16.9, R-1.5D, 90 Drgree, Size- 40NB, Wall thickness - 3.68mm,3- SS316L Bend, Seamless, Sch 40, Butt weld fittings as per ASME B16.9, R-1.5D, 90 Drgree, Size- 50NB, Wall thickness - 3.91mm,4- SS316L Bend, ERW, Sch 10, Butt weld fitting as per ASME B16.9, R-1.5D, 90 Degree, Size-80NB, Wall Thickness-3.04mm,5- SS316L Bend, ERW, Sch 10, Butt weld fitting as per ASME B16.9, R-1.5D, 90 Degree, Size-100NB, Wall Thickness-3.04mm,6- SS316L Bend, ERW, Sch 10, Butt weld fitting as per ASME B16.9, R-1.5D, 90 Degree, Size-150NB, Wall Thickness-3.38mm,7- SS316L Bend, ERW, Sch 10, Butt weld fitting as per ASME B16.9, R-1.5D, 45 Degree, Size-150NB, Wall Thickness- 3.38mm,8- SS316L Bend, ERW, Sch 10, Butt weld fitting as per ASME B16.9, R-1.5D, 45 Degree, Size-80NB, Wall Thickness- 3.04mm,9- SS316L seamless stub End pipe fitting, long n (1)
1- Troughing idler of 1000 mm width conveyor belt as per drawing no. UCT-1-MECH-CONV-IDLER-52, REV-1,2- Return idler of 1000mm width conveyor belt as per drawing no. UCT-1-MECH-CONV-IDLER-64, REV-6,3- Impact idler of 1000mm width conveyor belt as per drawing no. UCT-1-MECH-CONV-IDLER-53, REV-1,4- Self aligning return idler of 1000mm width conveyor belt as per drawing no. UCT-1-MECH-CONV-IDLER-57,5- Self-aligning Troughing idler of 1000mm width conveyor belt as per drawing no. UCT-1-MECH-CONV-IDLER-54, Rev-1 (1)
1- V Belt C-105,2- V Belt C 204,3- Belt, 8PK 1420LE Fanner,4- Belt, 8PK 1990LE Fanner,5- FAN Belt, SPZ 1340,6- FAN Belt, SPZ 2280,7- FAN Belt, SPZ 937,8- FAN Belt, SPZ 887,9- V Belt B1720 (1)
2/2 way inline solenoid valve, Port Size 1/2" , Electrically actuated (Actuation voltage: 230V AC) , (1)
2 x 12 Watts Mining Type LED Tube Light Fitting (1)
3.5 Core 120 Sqmm PVC single armoured aluminium cable (1)
3.7 KW, 5 HP, 3-Phase, 415 V AC, 50 Hz, TEFC, Efficiency Class- IE2, Horizontal foot mounted squirrel cage induction Motor,5.5 KW, 7.5 HP, 3-Phase, 415 V AC, 50 Hz, TEFC, Efficiency Class- IE2, Horizontal foot mounted squirrel cage induction Motor,7.5 KW, 10 HP, 3-Phase, 415 V AC, 50 Hz, TEFC, Efficiency Class- IE2, Horizontal foot mounted squirrel cage induction Motor,7.5 KW, 10 HP, 3-Phase, 415 V AC, 50 Hz, TEFC, Efficiency Class- IE2, Horizontal foot mounted squirrel cage induction Motor,15 KW, 10 HP, 3-Phase, 415 V AC, 50 Hz, TEFC, Efficiency Class- IE2, Horizontal foot mounted squirrel cage induction Motor,22 KW, 30 HP, 3-Phase, 415 V AC, 50 Hz, TEFC, Efficiency Class- IE2, Horizontal foot mounted squirrel cage induction Motor (1)
3 KVA ONLINE UPS (1)
3 mm Thick Pin Head Glass for window size- 11 inch x 16. 1 by 2 inch,.-Do- Size- 17 inch x 12 inch,.-Do- Size- 15 inch x 19 inch,.-Do- Size- 22 inch x 22 inch,.-Do- Size- 17.1 by 2 inch x 21 inch,.-Do- Size- 13 inch x 22 inch,.-Do- Size- 17 inch x 27 inch,.-Do- Size- 11 inch x 12 inch,.-Do- Size- 24 inch x 36 inch (1)
3 POLE POWER CONTACTOR WITH ECONOMY RESISTANCE TYPE- 3TF 56 PART NO-3TF5602-0DM4 MAKE-SIEMENS,DC COIL WITH ECONOMY RESISTANCE FOR CONTACTOR-3TF56 PART NO-3TY7563-ODM4 MAKE-SIEMENS,FIXED AND MOVING CONTACT SET FOR CONTACTOR - 3TF56 PART NO-3TY7560-0YA MAKE-SIEMENS (1)

Live tenders · All ministry pages · Search with filters · iBid.Win