Closed GeM tenders from PMO in Jharkhand for Micro desoldering tweezer WMRT set with safety rest

No closed Government e-Marketplace bids for Micro desoldering tweezer WMRT set with safety rest from PMO in Jharkhand are on record yet.

Browse by category

• Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (8)
• Electronic Weighing Scales (5)
• Digital Multimeter (3)
• Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (3)
• Antivirus Software (2)
• Computer Monitor (V2) (2)
• Electric Ceiling Fan (V4) ISI Marked to IS 374 (2)
• Enamel, Synthetic, Exterior (A) Undercoating (B) Finishing (V4) Confirming to IS 2932 (2)
• Galvanized Steel Sheets (Plain and Corrugated) (V2) as per IS 277 (2)
• Helicoverpa Lure (2)
• LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II) (2)
• Online UPS (?10 KVA) With Battery Conforming To IS 16242 (Part 1) (2)
• Outdoor Electrical Feeder Pillar Box (2)
• Portable Fire Extinguishers (V3) ISI Marked to IS 15683,Portable Fire Extinguishers (V3) ISI Marked to IS 15683,Portable Fire Extinguishers (V3) ISI Marked to IS 15683,GALVANIZED MILD STEEL FIRE BUCKET (V2) Conforming to IS 2546 (2)
• Respiratory Protective Devices- Filtering Half Masks (2)
• Stable Bleaching Powder for Treatment of Water Intended for Drinking (V3) conforming to IS 1065 (Part 2) (2)
• Toner Cartridges / Ink Cartridges / Consumables for Printers (2)
• true rms clamp meter (2)
• Unitary Air Conditioner (Window AC) (V3) ISI Marked to IS 1391 (Part 1) (2)
• Welding Cable ISI Marked To IS 9857 (V2) (2)
• XLPE Cable for Working Voltage up to and Including 1.1 KV Marked To IS 7098 (Part 1) (2)
• 0.5 Inch G.I. Nipple 3 Inch long both side male threaded,0.5 Inch G.I. Nipple 5 Inch long both side male threaded,3 by 4 Inch G.I. Nipple 3 Inch long both side male threaded,3 by 4 Inch G.I. Nipple 5 Inch long both side male threaded,1 Inch G.I. Nipple 5 Inch long both side male threaded,1 Inch G.I. Nipple 6 Inch long both side male threaded,1 Inch G.I. Nipple 8 Inch long both side male threaded,2 Inch G.I. Nipple 5 Inch long both side male threaded,2 Inch G.I. Nipple 6 Inch long both side male threaded,2 Inch G.I. Nipple 8 Inch long both side male threaded,2.5 Inch G.I. Nipple 8 Inch long both side male threaded (1)
• 0.63 KVAR, Air Core Dry Type indoor series reactor confirming to IS: 5553 Part III (1)
• 1- Body, MOC- C.I. With SS316 Cladding, Part No. 1,2- Head Drive End, MOC- C.I. With SS316 Cladding, Part No. 2-1,3- Head Idle End, MOC- C.I. With SS316 Cladding, Part No. 2-D,4- Cone Idle End, MOC- CI FG GR 260, Part No. 4-1,5- Cone Drive End, MOC- CI FG GR 260, Part No. 4-D,6- Packing Gasket Head and Body, Part No. 7,7- Packing Gasket Head and Cone, Part No. 8,8- Packing Rope - GLAND, Part No. 17 19sq. x 650mm long,9- Slinger, Part No. 21,10- Check Ball - DE and IE Head, Dia. 75 and Dia 63,11- Oil Seal-IE and DE Housing, MOC- STD, 1set-2Nos, Part No. 18,12- Oil Seal-DE Outer Cover, MOC- STD, Part No. 18-A,13- Shaft, MOC- EN8, Part No. 5,14- Shaft Sleeve, MOC- SS-304, 1set-2Nos, Part No. 22,15- Rotor, SG IRON 500-7, Part No. 3,16- Fasteners Head-Casing, Head-Cone, Bearing Cover, Gland (1)
• 1- Cast iron gate gate valve as per specification size - 1.5 inch NB,2- Cast iron gate valve as per specification size - 2 inch NB,3- Cast iron gate valve as per specification size - 2.5 inch NB,4- Cast iron gate valve as per specification size - 3 inch NB,5- Cast iron gate valve as per specification size - 4 inch NB,6- Cast iron gate valve as per specification size - 6 inch NB,7- Cast iron gate valve as per specification size - 8 inch NB (1)
• 1- Cast iron gate valve as per specification, Size - 2 inch NB - 50 mm,2- Cast iron gate valve as per specification, Size - 2.1by 2 inch NB - 65 mm,3- Cast iron gate valve as per specification, Size - 3 inch NB - 80 mm,4- Cast iron gate valve as per specification, Size - 4 inch NB - 100 mm,5- Cast iron gate valve as per specification, Size - 6 inch NB - 150 mm,6- Cast iron gate valve as per specification, Size - 8 inch NB - 200 mm (1)
• 1- Connecting Rod Bronze Bushing In connecting Rod on Front Rake Hanger Shaft,2- Reach Rod Rear and End Bronze Bushing,3- Rear Rake Hanger Bronze Bushings In Rear Rake Hanger on Rear Rake Hanger Shaft,4- Rear Rake Hanger Bronze Bushings In Rear Rake Hanger on Rear Rake Hanger Box Shaft,5- Eceentric Hub with Crank one RH,6- Rear Link one LH,7- Connecting Rod without Bushes,8- Rear Rake Hanger,9- Rear Rake Hanger Box,10- Connecting Rod Bearing Cover Outside cover and Inside Cover,11- Bush block Near Sprocket For Rake Classifier (1)
• 1- Container Sump, Part No- 1004001200,2- Set of control and Isolation Valve HP, Part No- 101500014,3- Set of sensor and switches HP, Part No- 1035000400,4- Temperature Controller, Part No- 10230005,5- Control Panel, Part No- 1041501230 (1)
• 1 - Diaphragm Valve for slurry line KB type manual operated, Size - 40 NB,2 - Diaphragm Valve for slurry line KB type manual operated, Size - 50 NB,3 - Diaphragm Valve for slurry line KB type manual operated, Size - 65 NB,4 - Diaphragm Valve for slurry line KB type manual operated, Size - 80 NB,5 - Diaphragm Valve for slurry line KB type manual operated, Size - 100 NB,6 - Diaphragm Valve for slurry line KB type manual operated, Size - 150 NB (1)
• 1 - Ecentric Shaft With 2 Nos. Key For Fly Wheel and 2 Nos. Key For Labyrinth seal, Drawing no. - Mark no. 1-154-011,1-154-A-011 Make- Tega McNally Mineral Limited,2 - PITMAN HOUSING COVER, Drawing no. - Mark No. 2-332-012, 2-332-A-012 Make- Tega McNally Mineral Limited,3 - INTERMEDIATE LABYRINTH SEAL, Drawing No. - Mark no. 1-154-007, 1-154-A-007 Make- Tega McNally Mineral Limited,4 - FIXED SIDE BEARING INSIDE COVER, Drawing No. - Mark No. 1-154-007, 1-154-A-007 Make- Tega McNally Mineral Limited,5 - FIXED SIDE BEARING INSIDE COVER, Drawing No. - Mark No. 1-154-007, 1-154-B-007 Make- Tega McNally Mineral Limited,6 - SIDE BEARING SLEEVE with PIN, Drawing No. - Mark No. 2-332-016, 2-332-A-016 Make- Tega McNally Mineral Limited,7 - SLEEVE PUSH TYPE REMOVAL, Drawing No. - Mark No. 3-145-010, 3-145-A-010 Make- Tega McNally Mineral Limited,8 - LOCK WASHER W-36 Make- Tega McNally Mineral Limited,9 - LOCK NUT, AN-36 Make- Tega McNally Mineral Limited,10 - FIXED SIDE BEARING COVER, Drawing No. - Mark No. 2-332-014, 2 (1)
• 1- Gumboot Half, Size No. - 5,2- Gumboot Half, Size No. - 6,3- Gumboot Half, Size No. - 7,4- Gumboot Half, Size No. - 8,5- Gumboot Half, Size No. - 9,6- Gumboot Half, Size No. - 10 (1)
• 1- Impeller CI FG 260,2- Shaft with key C40,3- Shaft sleeve nut C40,4- Casing wearing ring CI FG 260,5- Gland CI FG 260,6- Shaft sleeve CI FG 260,8- Bearing outer cover DE CI FG 260,7- Bearing outer cover DE CI FG 260,8- Complete rotor assembly including bearing housing assly (1)
• 1- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 6mm,2- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 8mm,3- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 10mm,4- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 12mm,5- Non-Asbestos Lub Graphite Brd. Gland Packing, Size - 14mm (1)
• 1- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 125 NB,2- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 150 NB,3- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 200 NB,4- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 50 NB,5- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 65 NB,6- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 80 NB,7- Operating diaphragm for G2K straight through type Diaphragm Valve, Size - 100 NB,8- Operating Diaphragm for S2K weir type Diaphragm Valve - 50 NB,9- Operating Diaphragm for S2K weir type Diaphragm Valve - 65 NB,10- Operating Diaphragm for S2K weir type Diaphragm Valve - 80 NB,11- Operating Diaphragm for S2K weir type Diaphragm Valve - 100 NB,12- Operating Diaphragm for S2K weir type Diaphragm Valve - 150 NB (1)
• 1- Pipe S.S. - 316L, 0.5 inch 15 NB, SCH. 40S, ASME B36.19M,2- Pipe S.S. - 316L, 3by4 inch 20 NB, SCH. 40S, ASME B36.19M,3- Pipe S.S. - 316L, 1.5 inch 40 NB, SCH. 40S, ASME B36.19M,4- Pipe S.S. - 316L, 2 inch 50 NB, SCH. 40S, ASME B36.19M,5- Pipe S.S. - 316L, 3 inch 75 NB, SCH. 40S, ASME B36.19M (1)
• 1- Pressure Guage, Dial Size - 4 inch, range 0 to 10 Kg per cm square as per technical specification attached.,2- Pressure Guage, Dial Size - 4 inch, range 0 to 20 Kg per cm square as per technical specification attached.,3- Pressure Guage, Dial Size - 4 inch, range 0 to 40 Kg per cm square as per technical specification attached.,4- Pressure Guage, Dial Size - 4 inch, range 0 to -760 mm Hg as per technical specification attached.,5- Pressure Guage, Dial Size - 4 inch, range 0 to 7 Kg per cm square as per technical specification attached.,6- Pressure Guage, Dial Size - 4 inch, range 0 to 250 Kg per cm square as per technical specification attached. (1)
• 1- Push-in T-Connector QST, Type- Festo QST-12-20, Part No.- 130806, Tubing OD- 12mm,2- Push-in T-Connector QS, Type- Festo QS-12-20, Part No.- 130690, Tubing OD- 12mm,3- Push-in-Fitting QSF-Female Thread with External Hex, Push-in Fitting with Female Thread, QSF-1by4-12-B, Type- Festo QSF-G1by4-12-B, Part No.- 190651, Female Thread G1by4, Tubing OD- 12mm,4- Push-in L-Fitting QSL- Male Thread with External Hex, Rotable. Push-in L-Fitting QSL-1by4-12-20, Type- Festo QSL-R1by4-12-20, Part No.- 130734, Male Thread R1by4, Tubing OD- 12mm,5- Push-in L-Fitting QSL- Male Thread with External Hex, Rotable. Push-in L-Fitting QSL-1by2-12-20, Type- Festo QSL-R1by2-12-20, Part No.- 130738, Male Thread R1by2, Tubing OD- 12mm,6- Reducing Nipple, Type- Festo NPFC-R-G34-G12-MF, Part No.- 8030313 (1)
• 1- Set of Motor Pump Assembly HP Part No.- 002500020,2- Set Of Strainer and Filter HP Part No.- 005000300,3- Set of Control and Isolation Valve LP Part No.- 00201500140,4- Set of Sensing Devices and Switches LP Part No.- 002500150010,5- Set of Pressure and Temperature Indicator HP Part No.- 00200020125,6- Set of Tubings, Fittings and Hoses HP Part No.- 0080020015 (1)
• 1- Set of pump Assembly LP Part No. - 00400050,2- Set of Strainers and Filter LP Part No. - 00500YTF,3- Set of Divider Manifolds HP Part No.-00400010,3- Set of Divider Manifolds LP Part No.-004000250,4- Set of Tubing, Fitting and Hoses LP, Part No.- 0080010015,5- Set of Pressure and Tempreture Indicator LP Part No.-00200020126 (1)
• 1- Spare Rubber Diaphragm for KB type striaght through Diaphragm Valve, Size -80 NB,2- Spare Rubber Diaphragm for KB type striaght through Diaphragm Valve, Size -100 NB,3- Spare Rubber Diaphragm for KB type striaght through Diaphragm Valve, Size -150 NB,4- Spare CI bonnet for 80 NB KB type straight through CIRL diaphragm valve,5- Spare CI bonnet for 100 NB KB type straight through CIRL diaphragm valve,6- Spare CI bonnet for 150 NB KB type straight through CIRL diaphragm valve,7- Spare CIRL valve body for 80 NB KB type straight through diaphragm valve,8- Spare CIRL valve body for 100 NB KB type straight through diaphragm valve,9- Spare CIRL valve body for 150 NB KB type straight through diaphragm valve (1)

Live tenders · All ministry pages · Search with filters · iBid.Win