GeM tenders from PMO in Jharkhand for Personal Fall Arrest System- Full Body Harness Conforming to IS 3521 (Part 1)

No Government e-Marketplace bids for Personal Fall Arrest System- Full Body Harness Conforming to IS 3521 (Part 1) from PMO in Jharkhand are open right now. The last one closed on 17 Aug 2026 in Jharkhand. Here is the one on record; new bids appear on this page as soon as GeM publishes them.

Bids on record (1)

1. Personal Fall Arrest System- Full Body Harness Conforming to IS 3521 (Part 1) — Department of Atomic Energy · Jharkhand · Closed 17 Aug 2026

Get alerts for new bids with a free account

Browse by category

• 1 - Comp. Bowl assy with IMP.,2 - Shaft Enclosing, MOC-MS,3 - Half column Pipe, 83, MOC-ERW,4 - Full column Pipe, 32, MOC-ERW,5 - Line shaft Half 1.5M, MOC-SS410T,6 - Line Shaft Brg., MOC- BR.LTB2,7 - Line Shaft Coupling, MOC-SS410T,8 - Guide spider assly., MOC-CIFG200,9 - Guide ring washer rubber, 37, MOC-Rubber,10 - Tube tension nipple and CL, MOC-MS,11 - Set Screw for 70,79, MOC-IS2388,12 - Tube tension Plate, MOC-CIFG200,13 - Full line shaft 3M, MOC-410T,14 - Impeller shaft coupling, Model No 350T4A4, MOC-SS410T,15 - Gland, Model 350T4A4, Drg No.N24825, MOC-CIFG200,16 - Strainger, Model No. 350T4A4, Drg No. N24825, MOC-MS,17 - Lantern ring, Model No. 350T4A4, Drg No. N24825, MOC-4223M IS618,18 - Gland Packing, Model No. 350TA4, Drg No. N24825, MOC-ASBESTOS,19 - Head shaft, Model No. 350T4A4, Drg. No. N24825, MOC-SS410T,20 - Head shaft coupling, Model No. 350T4A4, Drg. No. N24825, MOC-SS410T,21 - Impeller adjusting nut, Model No. 350T4A4, Drg. No. N24825, MOC - 40C8 (1)
• 1 - Spares Natural Rubber Diaphragm, Size - 25 NB KB type for Saunders-Crane-BDK Valve,2 - Spares Natural Rubber Diaphragm, Size - 50 NB KB type for Saunders-Crane-BDK Valve,3 - Spares Natural Rubber Diaphragm, Size - 80 NB KB type for Saunders-Crane-BDK Valve,4 - Spares Natural Rubber Diaphragm, Size - 100 NB KB type for Saunders-Crane-BDK Valve,5 - Spares Natural Rubber Diaphragm, Size - 150 NB KB type for Saunders-Crane-BDK Valve,6 - Spares Natural Rubber Diaphragm, Size - 250 NB KB type for Saunders-Crane-BDK Valve,7 - Spares CI Bare Body with Body Rubber Lining, Size - 25 NB for Saunders-Crane-BDK Valve,8 - Spares CI Bare Body with Body Rubber Lining, Size - 50 NB for Saunders-Crane-BDK Valve,9 - Spares CI Bare Body with Body Rubber Lining, Size - 80 NB for Saunders-Crane-BDK Valve,10 - Spares CI Body with Body Rubber Lining, Size - 100 NB for Saunders-Crane-BDK Valve,11 - Spares CI Bare Body with Body Rubber Lining, Size - 150 NB for Saunders-Crane-BDK Valve,12 - Spares CI Bare Body with Body Rubber Lin (1)
• Camera for CCTV System (V3) (1)
• Caustic Soda Flakes 99.5% NaOH (1)
• Coarse Pebbles, Size- 40mm (1)
• Complete Modified/Enlarged Tyre 7.00 X 12 enlarge to 9.00 X 12 Super Lift/Sleek 12 PR,Tube Size 7.00 X 12 (Tube Inflating Valve Nozzle No. TR75 A),Flap 7.00 X 12 (1)
• Conveyor Belt as per specification attached below, belt width - 1200 mm Rating - 630/4, Heavy Duty, (1)
• CYLINDER HEAD ASSY. FOR 6L912W ESN-08916059 P/N 0423 2889. (1)
• Electronics & Hardware Kit (1)
• Ferric Alum (Grade - IV) as per IS-299: 2012 (1)
• Flat Brushes for Paints and Varnishes for Heavy Duty (V2) conforming to IS 384 (Part 1) (1)
• Fully automated double-beam Flame & automated Graphite Furnace based Atomic Absorption Spectrometer (1)
• Grid Resistance Starter, Motor- 335 KW, Rotor Voltage- 490 Volts, Rotor Current- 425 Amp (1)
• High carbon steel Grinding Rod 3.35 meter long (100 mm dia) (1)
• Hot Rolled SS316L Sheet as per ASTM A240 Grade, Size- 2 mm thick,Hot Rolled SS316L Sheet as per ASTM A240 Grade, Size- 3.15 mm thick,Hot Rolled SS316L Sheet as per ASTM A240 Grade, Size- 4 mm thick,Hot Rolled SS316L Sheet as per ASTM A240 Grade, Size- 5 mm thick,Hot Rolled SS316L Sheet as per ASTM A240 Grade, Size- 8 mm thick (1)
• KIT SEAL 801476 DANA SPICER MAKE REQUIRED,BEARING KIT PART NO 702399, DANA SPICER MAKE REQUIRED,SNAP RING KIT PART NO 602679,CLUTCH KIT PART NO- 5609879, DANA SPICER MAKE REQUIRED (1)
• Kit Turbo Charger 2881754 same as No P1608306094 Part No-2881754 or 4046106 or 4040256 MAKE-CUMMINS,Injector 5263308NX Part No-5263308NX MAKE-CUMMINS,Connector Injector Fuel Supply Part No-4929864 MAKE-CUMMINS,Gasket Exhaust Manifold Part No-3937479 MAKE-CUMMINS,Gasket, Valve Cover Part No-3959798 MAKE-CUMMINS,Cylinder Head Gasket Part No-3967059 or 4981796 MAKE-CUMMINS,Gasket Turbo Charger Part No-3901356 MAKE-CUMMINS,Gasket Oil Drain Part No-3937706 MAKE-CUMMINS,Gasket Rocker Lever Housing Part No-3966708 MAKE-CUMMINS,Seal O Ring 3682177 Part No-3682177 For Cummins Engine-QSL-9 MAKE-CUMMINS,Manifold Exhaust Part No-3937478 MAKE-CUMMINS,Manifold Exhaust Part No-3968362 MAKE-CUMMINS,Sensor Pressure Part No-4076493 MAKE-CUMMINS,Sensor Position Part No-2872277 MAKE-CUMMINS,Sensor Position Part No-2872279 MAKE-CUMMINS (1)
• LED-Fluorimeter (With Cuvettes, Buffer dispenser, Calibration standards, & data communication system) (1)
• Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1) (1)
• Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2) (1)
• Over Head wire rope suspension assy consisting of 6 mm Galvanised wire rope‘ D’ link rope clamp (1)
• PABX System - EPABX (V2) (1)
• Polypropylene monofilament Filter Cloth for Acidic and Neutral HBF as per specification attached. (1)
• Rope Steel Wire 12.00 mm, Dia 18/7 (1)
• Screen Pannel, Size: 25 SQ. MM, Drg. No. UCI/M-945/A,Screen Pannel, Size: 50 SQ. MM, Drg. No. UCI/M-944/A (1)
• Simplex Roller Chain No. 3119 Pitch 1.1/4” (31.75 mm) Roller Diameter¾ ” (19.05 mm),Connecting Link with Circlip Lock Type for Simplex Roller Chain No. 3119 Pitch 1.1/4” (31.75 mm) (1)
• Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 (1)
• Sulphuric Acid (Technical Grade Percent by Mas Min. 98% Concentration) Confirming To IS: 266-1993,Sulphuric Acid (Technical Grade Percent by Mas Min. 98% Concentration) Confirming To IS: 266-1993 (1)
• SUPPLY INSTALLATION & COMMISIIONING OF SIMATIC 57-300, CP 341 COMMUNICATION PROCESSOR, MAKE-SIEMENS (1)
• Water Distillation Unit (V3) (1)
• XLPE Cable for Working Voltage up to and Including 1.1 KV Marked To IS 7098 (Part 1) (1)
• XLPE Cable, Working Voltage from 3.3 kV up to and including 33 kV (V2) ISI Marked to IS 7098 (Part 2) (1)

Closed tenders · All ministry pages · Search with filters · iBid.Win