Air line lubricator · Claw coupling with Hose Nipple 3 by 4 inch · Claw coupling with Male Nipple 3 by 4 inch · Claw coupling with Female Nipple 3 by 4 · Coupling Rubber Washer · Grinder Wheel 8 inch

Open tender on the Government e-Marketplace.

• Buyer: Department of Defence
• Ministry: Ministry of Defence
• Category: Air line lubricator,Claw coupling with Hose Nipple 3 by 4 inch,Claw coupling with Male Nipple 3 by 4 inch,Claw coupling with Female Nipple 3 by 4,Coupling Rubber Washer,Grinder Wheel 8 inch dia,Angle grinder or straight grinder,TCT drill rod 1800 x 33 or 34 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 1200 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 1600 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 800 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch or 108 mm x 7 by 8 inch hex or 22 mm Hex of length 2600 mm x 33 mm or 34 mm bit dia,Repair kit Jack Hammer Atlas Copco Seal kit small,Y Conector 20 mm or 3 by 4 inch,Pneumatic cotton shetthed rubber hose pipe 20 mm inner dia suitable for working at 7 point 5 Kg per sq cm air pressure
• Location: West Siang
• EMD: ₹20,000
• Bid type: bid (goes to reverse auction)
• Published on: 04 Nov 2026
• Closing on: 16 Nov 2026, 11:00 am IST

About this tender

Air line lubricator , Claw coupling with Hose Nipple 3 by 4 — total quantity 450. EMD ₹20,000; ePBG 5% for 12 months. Delivery to 1 consignee location, 60 days delivery. MSE relaxations available; EMD exemption route; ±25% option clause on quantity.

Who can bid, EMD and how to apply

• Who can bid: any seller registered on the Government e-Marketplace for Air line lubricator,Claw coupling with Hose Nipple 3 by 4 inch,Claw coupling with Male Nipple 3 by 4 inch,Claw coupling with Female Nipple 3 by 4,Coupling Rubber Washer,Grinder Wheel 8 inch dia,Angle grinder or straight grinder,TCT drill rod 1800 x 33 or 34 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 1200 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 1600 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 800 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch or 108 mm x 7 by 8 inch hex or 22 mm Hex of length 2600 mm x 33 mm or 34 mm bit dia,Repair kit Jack Hammer Atlas Copco Seal kit small,Y Conector 20 mm or 3 by 4 inch,Pneumatic cotton shetthed rubber hose pipe 20 mm inner dia suitable for working at 7 point 5 Kg per sq cm air pressure. Registered MSEs and DPIIT-recognised startups can claim EMD exemption on this bid.
• EMD: ₹20,000.
• Last date: bids close on 16 Nov 2026, 11:00 am IST.
• Where to apply: on GeM (bidplus.gem.gov.in). The bid number, documents and buyer details open with a free iBid.Win account.

Did you know? More tenders from Border Road Organisation

Same GeM buyer account · 4 open tenders

• Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2),Unitary Air Conditioner (Window AC) (V3) ISI Marked to IS 1391 (Part 1),Automatic Line Voltage Correctors (Step Type) For Domestic Use (Stabilizer) Conforming To IS 8448 — Department of Defence
• Block out Thrie Beam Semi Rigid Type Steel Barrier,W beam metal crash Barrier,W beam metal crash Barrier,Barrier tape,Metal Crash Barrier Reflector,Metal Crash Barrier Reflector — Department of Defence
• Supply and stacking of Pre-cast culvert 2 mtr span and 2 mtr height single cell,supply and stacking of pre cast 1 m trapezoidal line drain — Department of Defence
• Stationary Valve Regulated Lead Acid Batteries (V3) Conforming To IS 15549 — Department of Defence

Browse live GeM tenders · Guides for bidders · More from Ministry of Defence · More Air line lubricator,Claw coupling with Hose Nipple 3 by 4 inch,Claw coupling with Male Nipple 3 by 4 inch,Claw coupling with Female Nipple 3 by 4,Coupling Rubber Washer,Grinder Wheel 8 inch dia,Angle grinder or straight grinder,TCT drill rod 1800 x 33 or 34 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 1200 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 1600 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch shank x 7 by 8 inch hex overall length 800 x 34 mm or 33 mm,TCT drill rod 4 point 25 inch or 108 mm x 7 by 8 inch hex or 22 mm Hex of length 2600 mm x 33 mm or 34 mm bit dia,Repair kit Jack Hammer Atlas Copco Seal kit small,Y Conector 20 mm or 3 by 4 inch,Pneumatic cotton shetthed rubber hose pipe 20 mm inner dia suitable for working at 7 point 5 Kg per sq cm air pressure tenders