GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK. · CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED · HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA · SCR
Open tender on the Government e-Marketplace.
- Buyer: Department of Defence Production
- Ministry: Ministry of Defence
- Category: GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,SCREW B1. M6-8G X 10.48. 019 AS PER GOST 17473-80,SCREW B1. M6-8
- Bid type: bid
- Published on: 26 Oct 2026
- Closing on: 06 Nov 2026, 03:00 pm IST
Who can bid, EMD and how to apply
- Who can bid: any seller registered on the Government e-Marketplace for GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,SCREW B1. M6-8G X 10.48. 019 AS PER GOST 17473-80,SCREW B1. M6-8.
- EMD: as declared on GeM.
- Last date: bids close on 06 Nov 2026, 03:00 pm IST.
- Where to apply: on GeM (bidplus.gem.gov.in). The bid number, documents and buyer details open with a free iBid.Win account.
Similar live tenders
- CHEESE HEAD SCREW M6 X 18 TO IS 1366-6.6 FULL THREADED ZINC PLATING 9 MICRONS THICK. (MAKE: TVS/UNBRAK,CHEESE HEAD SCREW M6 X 18 TO IS 1366-6.6 FULL THREADED ZINC PLATING 9 MICRONS THICK. (MAKE: TVS/UNBRAK,CHEESE HEAD SCREW M6 X 18 TO IS 1366-6.6 FULL THREADED ZINC PLATING 9 MICRONS THICK. (MAKE: TVS/UNBRAK,CHEESE HEAD SCREW M6 X 18 TO IS 1366-6.6 FULL THREADED ZINC PLATING 9 MICRONS THICK. (MAKE: TVS/UNBRAK,CHEESE HEAD SCREW M4X12 TO IS 1366 4.6 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M4X12 TO IS 1366 4.6 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M4X12 TO IS 1366 4.6 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M4X12 TO IS 1366 4.6 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M5 x12 TO IS-1366 4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHAM,CHEESE HEAD SCREW M5 x12 TO IS-1366 4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHAM,CHEESE HEAD SCREW M5 x12 TO IS-1366 4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHAM,CHEESE HEAD SCREW M5 x12 TO IS-13 — Department of Defence Production, Telangana (Items alike: microns thick, zinc plating, micron; Same buyer account)
- ZINC ANODE (99.99% ) FOR ZINC PLATING AS PER IS: 2605-1985 GRADE-1 — Department of Defence Production, Uttar Pradesh (Items alike: zinc plating, zinc; Same ministry)
- HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,NUT M8X1.6. 019 GOST: 5927-70,NUT M8X1.6. 019 GOST: 5927-70,NUT M8X1.6. 019 GOST: 5927-70,NUT M8X1.6. 019 GOST: 5927-70,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76 — Department of Defence Production (Items alike: microns thick, zinc plating, micron; Same buyer account)
Did you know? More tenders from Armoured Vehicles Nigam Limited · Ordnance Factory Medak
Same GeM buyer account · 13 open tenders
- BOLT M6.6g X 40.46. 019, GOST 7795-70,BOLT M6.6g X 40.46. 019, GOST 7795-70,BOLT M6.6g X 40.46. 019, GOST 7795-70,BOLT M6.6g X 40.46. 019, GOST 7795-70,BOLT M6.6g X 40.46. 019, GOST 7795-70,BOLT 3M8-8g X 35.46. 019 TO GOST 7795-70,BOLT 3M8-8g X 35.46. 019 TO GOST 7795-70,BOLT 3M8-8g X 35.46. 019 TO GOST 7795-70,BOLT 3M8-8g X 35.46. 019 TO GOST 7795-70,BOLT 3M8-8g X 35.46. 019 TO GOST 7795-70,HEX BOLT 3M8 X 30.46. 019 GOST 7796-70,HEX BOLT 3M8 X 30.46. 019 GOST 7796-70,HEX BOLT 3M8 X 30.46. 019 GOST 7796-70,HEX BOLT 3M8 X 30.46. 019 GOST 7796-70,HEX BOLT 3M8 X 30.46. 019 GOST 7796-70,BOLT M10 X 16.46. 019 GOST 7796-70,BOLT M10 X 16.46. 019 GOST 7796-70,BOLT M10 X 16.46. 019 GOST 7796-70,BOLT M10 X 16.46. 019 GOST 7796-70,BOLT M10 X 16.46. 019 GOST 7796-70,BOLT M6X25.46. 019 GOST: 7798-70,BOLT M6X25.46. 019 GOST: 7798-70,BOLT M6X25.46. 019 GOST: 7798-70,BOLT M6X25.46. 019 GOST: 7798-70,BOLT M6X25.46. 019 GOST: 7798-70 — Department of Defence Production
- BEARING 6-104 GOST 8338-75 & ETY 500. APPROVED 'MAKE' HMT6004/P6, SKF 6004/P6, FAG 6004/P6 & NBC 600,BEARING 6-104 GOST 8338-75 & ETY 500. APPROVED 'MAKE' HMT6004/P6, SKF 6004/P6, FAG 6004/P6 & NBC 600,BEARING 6-7000103 GOST 8338-75 & ETY 500. APPROVED 'MAKE': HMT 16003/P6, SKF 16003/P6 & FAG 16003/P6,,BEARING 6-7000103 GOST 8338-75 & ETY 500. APPROVED 'MAKE': HMT 16003/P6, SKF 16003/P6 & FAG 16003/P6, — Department of Defence Production
- HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,HEX NUT M4.6. 016 TO GOST 5927-70 Eq. MAT. 40 C8 tO IS: 9550,NUT M8X1.6. 019 GOST: 5927-70,NUT M8X1.6. 019 GOST: 5927-70,NUT M8X1.6. 019 GOST: 5927-70,NUT M8X1.6. 019 GOST: 5927-70,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M6XT12 / 6g X 16.66. 019 GOST 22036-76, Zinc plating 9 microns thick followed by chromate tratme,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76,STUD M10 X T12/6g X 30.66. 019 GOST 22034-76 — Department of Defence Production
- BEARING NO. 32007 X/Q, SKF MAKE (INDUSTRIAL BEARING),BEARING NO. 32007 X/Q, SKF MAKE (INDUSTRIAL BEARING),BEARING NO. 32007 X/Q, SKF MAKE (INDUSTRIAL BEARING),SINGLE ROW DEEP GROOVE BALL BEARING NO: 6202 ZZ (BEARING SHALL BE BRAND NEW ORIGINAL IN MANUFACTURERS,SINGLE ROW DEEP GROOVE BALL BEARING NO: 6202 ZZ (BEARING SHALL BE BRAND NEW ORIGINAL IN MANUFACTURERS,SINGLE ROW DEEP GROOVE BALL BEARING NO: 6202 ZZ (BEARING SHALL BE BRAND NEW ORIGINAL IN MANUFACTURERS,NEEDLE ROLLER BEARING NO: NA 4909 X P5,NEEDLE ROLLER BEARING NO: NA 4909 X P5,NEEDLE ROLLER BEARING NO: NA 4909 X P5 — Department of Defence Production
- RIVET SNAP HEAD 3X6.01. 10 GOST: 10299-80,RIVET SNAP HEAD 3X6.01. 10 GOST: 10299-80,RIVET SNAP HEAD 3X6.01. 10 GOST: 10299-80,RIVET SNAP HEAD 3X6.01. 10 GOST: 10299-80,RIVET SNAP HEAD 3X6.01. 10 GOST: 10299-80,RIVET SNAP HEAD 3X6.01. 10 GOST: 10299-80,RIVET 4X20.36 GOST: 10299-80, Anodic oxidation followed by Bichromate treatment.,RIVET 4X20.36 GOST: 10299-80, Anodic oxidation followed by Bichromate treatment.,RIVET 4X20.36 GOST: 10299-80, Anodic oxidation followed by Bichromate treatment.,RIVET 4X20.36 GOST: 10299-80, Anodic oxidation followed by Bichromate treatment.,RIVET 4X20.36 GOST: 10299-80, Anodic oxidation followed by Bichromate treatment.,RIVET 4X20.36 GOST: 10299-80, Anodic oxidation followed by Bichromate treatment.,RIVET 4X26.01. 10 GOST: 10299-80" OR" SNAP HEAD RIVET 4X26 GRADE 2, IS: 2998, COATING: ANODIC OXIDATION,RIVET 4X26.01. 10 GOST: 10299-80" OR" SNAP HEAD RIVET 4X26 GRADE 2, IS: 2998, COATING: ANODIC OXIDATION,RIVET 4X26.01. 10 GOST: 10299-80" OR" SNAP HEAD RIVET 4X26 GRADE 2, IS: 2998, — Department of Defence Production
- BEARING 6-80104 GOST: 7242-81 & ETY 500. APROVED MAKE: HMT 6004ZZ/P6, SKF 6004ZZ/P6 & FAG 6004ZZR/P6,,BEARING 6-80104 GOST: 7242-81 & ETY 500. APROVED MAKE: HMT 6004ZZ/P6, SKF 6004ZZ/P6 & FAG 6004ZZR/P6,,BEARING 6-80104 GOST: 7242-81 & ETY 500. APROVED MAKE: HMT 6004ZZ/P6, SKF 6004ZZ/P6 & FAG 6004ZZR/P6,,BEARING 6-100L GOST 8338-75 & ETY 500 APPROVED MAKE: HMT 6000FY/P6, SKF 6000M/P6, FAG 6000M/P6, PRE,BEARING 6-100L GOST 8338-75 & ETY 500 APPROVED MAKE: HMT 6000FY/P6, SKF 6000M/P6, FAG 6000M/P6, PRE,BEARING 6-100L GOST 8338-75 & ETY 500 APPROVED MAKE: HMT 6000FY/P6, SKF 6000M/P6, FAG 6000M/P6, PRE,BEARING 312 GOST 8338-75. APPROVED MAKE; HMT 6312, NBC 6312, SKF 6312, FAG 6312, AEC 6312, ZNL 6312(M/s Pre,BEARING 312 GOST 8338-75. APPROVED MAKE; HMT 6312, NBC 6312, SKF 6312, FAG 6312, AEC 6312, ZNL 6312(M/s Pre,BEARING 312 GOST 8338-75. APPROVED MAKE; HMT 6312, NBC 6312, SKF 6312, FAG 6312, AEC 6312, ZNL 6312(M/s Pre — Department of Defence Production
Browse live GeM tenders · Guides for bidders · More from Ministry of Defence · More GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,GRUB SCREW AM5 X 5 IS 2388-6.6 PITCH= 0.8 TO IS 4218(III) 76 ZINC PLATING 9 MICRONS THICK.,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,CHEESE HEAD SCREW M3 X 12 TO IS 1366-4.8 FULL THREADED, HEAD EDGE TO BE ROUNDED SCREW EDGE TO BE CHA,SCREW B1. M6-8G X 10.48. 019 AS PER GOST 17473-80,SCREW B1. M6-8 tenders