Indexable endmill with a multi-master adaption carrying tangentially clamped inserts Z 3 Depth of Cut max 5mm Functional length 16 06 mm OAL 24 mm T290ELN D14-03-mm T08-05 · Multi-master cylindrical s

This tender has closed. It is published here as a public record.

• Buyer: Department of Military Affairs
• Ministry: Ministry of Defence
• Category: Indexable endmill with a multi-master adaption carrying tangentially clamped inserts Z 3 Depth of Cut max 5mm Functional length 16 06 mm OAL 24 mm T290ELN D14-03-mm T08-05,Multi-master cylindrical shank suitable for 14 mm dia indexable Endmill interchangeable milling heads, shank dia 14 mm OAL -100mm MM TS -A-L100-C14-T10,Indexable Endmill with a multi-master adaption carrying tangentially clamped inserts Z-4 depth of cut max 5 mm Functional length 19.25 mm OAL 30 55 mm T290 ELN D16-04-MMT 10-05,Multi-master cylindrical shank suitable for dia 16 mm indexable endmill interchangeable milling heads Shank ida 16 mm OAL 100 mm MM TS-A-L100-C16-T10,Endmill cutter multifunctional with through coolant Z-2 usable length 15 mm head length 35mm shank dia 20 mm OAL 145 mm MDR D20-2-C20-AN09,Double sided rectangle inserts with 4 cutting edges with 2 centre cutting edge for drilling and 2 peripheral cutting edge,Indexable endmill dia 10 mm with multi-master adaption carrying tangentially clamped insert Z-2 Depth of Cut max
• Location: Bangalore, Karnataka
• Estimated value: ₹5,88,669
• Bid type: bid (goes to reverse auction)
• Published on: 16 Sept 2026
• Closed on: 29 Sept 2026, 04:00 pm IST

About this tender

Indexable endmill with a multi-master adaption carrying — total quantity 58. Delivery to 4 consignee locations, 30 days delivery. MSE relaxations available; ±25% option clause on quantity.

Who can bid, EMD and how to apply

• Who can bid: any seller registered on the Government e-Marketplace for Indexable endmill with a multi-master adaption carrying tangentially clamped inserts Z 3 Depth of Cut max 5mm Functional length 16 06 mm OAL 24 mm T290ELN D14-03-mm T08-05,Multi-master cylindrical shank suitable for 14 mm dia indexable Endmill interchangeable milling heads, shank dia 14 mm OAL -100mm MM TS -A-L100-C14-T10,Indexable Endmill with a multi-master adaption carrying tangentially clamped inserts Z-4 depth of cut max 5 mm Functional length 19.25 mm OAL 30 55 mm T290 ELN D16-04-MMT 10-05,Multi-master cylindrical shank suitable for dia 16 mm indexable endmill interchangeable milling heads Shank ida 16 mm OAL 100 mm MM TS-A-L100-C16-T10,Endmill cutter multifunctional with through coolant Z-2 usable length 15 mm head length 35mm shank dia 20 mm OAL 145 mm MDR D20-2-C20-AN09,Double sided rectangle inserts with 4 cutting edges with 2 centre cutting edge for drilling and 2 peripheral cutting edge,Indexable endmill dia 10 mm with multi-master adaption carrying tangentially clamped insert Z-2 Depth of Cut max.
• EMD: as declared on GeM.
• Last date: closed on 29 Sept 2026, 04:00 pm IST.
• Where to apply: on GeM (bidplus.gem.gov.in). The bid number, documents and buyer details open with a free iBid.Win account.

Did you know? More tenders from Bangalore, Karnataka

Same location · 339 open tenders

• Anti Bird Netting (V2) — Department of Military Affairs
• Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Socket Unions confirming to IS 1239 (Part 2),Elbow, Equal, 135 Degrees conforming to IS 1239 (Part 2),Elbow, Equal, 135 Degrees conforming to IS 1239 (Part 2),Elbow, Equal, 135 Degrees conforming to IS 1239 (Part 2),Elbow, Equal, 135 Degrees conforming to IS 1239 (Part 2),Elbow, Equal, 135 Degrees conforming to IS 1239 (Part 2),Elbow, Equal, 135 Degrees conforming to IS 1239 (Part 2),Elbows, Tees and Crosses, Equal confirming to IS 1239 (Part 2),Elbows, Tees and Crosses, Equal confirming to IS 1239 (Part 2),Elbows, Tees and Crosses, Equal confirming to IS 1239 (Part 2),Elbows, Tees and Crosses, Equal confirming to IS 1239 (Part 2),Elbows, Tees and Crosses, — Department of Military Affairs
• Indoor Gym Shed — Department of Military Affairs
• Fuel tank cleaning machine — Department of Military Affairs
• 2 POINT 5 Ton Tata veh BA No 16C 104047H Head gas Kit,2 POINT 5 Ton Tata veh BA No 16C 104047H Anabond,2 Point 5 Ton Tata veh BA No 16C 104082K Self Starter Repair Service,2 Point 5 Ton Tata veh BA No 16C 104082K Flay Wheel Ring,2 Point 5 Ton Tata veh BA No 16C 104082K Clutch Plate Repair,2 Point 5 Ton Tata veh BA No 16C 104082K Brake Booster Repair,2 Point 5 Ton Tata veh BA No 16C 104082K pressure plate skimming,2 Point 5 Ton Tata veh BA No 16C 104026Y Propeller Shaft Milling,2 Point 5 Ton Tata veh BA No 16C 104026Y Lathe wk Propeller Shaft Milling Fitting Finishing,2 Point 5 Ton Tata veh BA No 16C 104026Y Universal Joint,2 Point 5 Ton Tata veh BA No 16C 104026Y Tail Door Welding Wk,2 Point 5 Ton Tata veh BA No 14C 101276H Rotary Switch,2 Point 5 Ton Tata veh BA No 14C 101276H Fuel Pipe,ALS veh BA No 05D 163332M CLUTCH PLATE,ALS veh BA No 05D 163332M RELEASE BEARING,ALS veh BA No 05D 163332M PRESSURE PLATE SKIMMING AND FINISHING,ALS veh BA No 05D 163332M FLY WHEEL SKIMMING AND FINISHING,ALS veh BA No 05D 163 — Department of Military Affairs
• Cotton Mattresses — Department of Military Affairs

Browse live GeM tenders · Guides for bidders · More from Ministry of Defence · More in Karnataka · More Indexable endmill with a multi-master adaption carrying tangentially clamped inserts Z 3 Depth of Cut max 5mm Functional length 16 06 mm OAL 24 mm T290ELN D14-03-mm T08-05,Multi-master cylindrical shank suitable for 14 mm dia indexable Endmill interchangeable milling heads, shank dia 14 mm OAL -100mm MM TS -A-L100-C14-T10,Indexable Endmill with a multi-master adaption carrying tangentially clamped inserts Z-4 depth of cut max 5 mm Functional length 19.25 mm OAL 30 55 mm T290 ELN D16-04-MMT 10-05,Multi-master cylindrical shank suitable for dia 16 mm indexable endmill interchangeable milling heads Shank ida 16 mm OAL 100 mm MM TS-A-L100-C16-T10,Endmill cutter multifunctional with through coolant Z-2 usable length 15 mm head length 35mm shank dia 20 mm OAL 145 mm MDR D20-2-C20-AN09,Double sided rectangle inserts with 4 cutting edges with 2 centre cutting edge for drilling and 2 peripheral cutting edge,Indexable endmill dia 10 mm with multi-master adaption carrying tangentially clamped insert Z-2 Depth of Cut max tenders