Sluice valve PN 1 point 6 both side flanged drilled 250mm cast iron body · Motovised actuator ball valve 80mm dia · Twin outlet hydrants valves 100millimetres having 65millimetres outlet with lock pin

This tender has closed. It is published here as a public record.

• Buyer: Department of Military Affairs
• Ministry: Ministry of Defence
• Category: Sluice valve PN 1 point 6 both side flanged drilled 250mm cast iron body,Motovised actuator ball valve 80mm dia,Twin outlet hydrants valves 100millimetres having 65millimetres outlet with lock pin hydrants valves,PPR Gate valve 50 millimetres Brass Insent of size suitable for 50 millimetre 50mm dia PPR Pipes fit size,Lid covers for 3000 litres tank main hole 15 point 7 inches approved by FDA 100,Motorised actuators Buterfly valves of size 300 mm Motorised actuators Buterfly valves,Motorised actuator suitable for ball valve 100 mm dia,Rubber matting 2 into 1M into 25mm,Cast iron pipe with spigot 150mm,Tee with all flanged of size 100 into 100 into 80 inch conforming IS 1538 Weight 129kgs,3 pole power contractor MNX 32 3 pole power contractor MNX 32,Lid covers suitable for 5000 litres pvc water storage tank 20 Inches,Rubber matting 2x1Mx19mm,Single outlet hydrant valve 100mm having 65mm outlet with lock pin,3 pole power contractor MNX 140,Tee with all socket of size 300 into 300 into 100mm cast iron IS 1538,The
• Location: Mumbai, Maharashtra
• EMD: ₹2,78,976
• Bid type: bid (goes to reverse auction)
• Published on: 23 Sept 2026
• Closed on: 03 Oct 2026, 04:00 pm IST

About this tender

bore 6 Mtr Length , Soda Ash , EN 45 Addressable type multi — total quantity 4,931. EMD ₹2,78,976; ePBG 5% for 12 months. Delivery to 5 consignee locations, 15 days delivery. MSE relaxations available; EMD exemption route.

Who can bid, EMD and how to apply

• Who can bid: any seller registered on the Government e-Marketplace for Sluice valve PN 1 point 6 both side flanged drilled 250mm cast iron body,Motovised actuator ball valve 80mm dia,Twin outlet hydrants valves 100millimetres having 65millimetres outlet with lock pin hydrants valves,PPR Gate valve 50 millimetres Brass Insent of size suitable for 50 millimetre 50mm dia PPR Pipes fit size,Lid covers for 3000 litres tank main hole 15 point 7 inches approved by FDA 100,Motorised actuators Buterfly valves of size 300 mm Motorised actuators Buterfly valves,Motorised actuator suitable for ball valve 100 mm dia,Rubber matting 2 into 1M into 25mm,Cast iron pipe with spigot 150mm,Tee with all flanged of size 100 into 100 into 80 inch conforming IS 1538 Weight 129kgs,3 pole power contractor MNX 32 3 pole power contractor MNX 32,Lid covers suitable for 5000 litres pvc water storage tank 20 Inches,Rubber matting 2x1Mx19mm,Single outlet hydrant valve 100mm having 65mm outlet with lock pin,3 pole power contractor MNX 140,Tee with all socket of size 300 into 300 into 100mm cast iron IS 1538,The.
• EMD: ₹2,78,976.
• Last date: closed on 03 Oct 2026, 04:00 pm IST.
• Where to apply: on GeM (bidplus.gem.gov.in). The bid number, documents and buyer details open with a free iBid.Win account.

Similar live tenders

• Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 — Urban Development and Environment Department (Items alike: sluice valve)
• Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 — COAL INDIA LIMITED (Items alike: sluice valve)

Did you know? More tenders from Indian Army

Same GeM buyer account · 3 open tenders

• Manufacture and Supply of Cot DT Steel Plywood top,Manufacture and Supply of Locker Bed side steel,M and S of Locker Bed side steel,Manufacture and Supply of Shoe Rack SS 304 02 Selves size 90cm into 30cm into 30cm,M and S of Shoe Rack SS 304 02 Selves size 90cm into 30cm into 30cm — Department of Military Affairs
• Stainless Steel Sinks for Domestic Purposes (V3) as per IS 13983,GI Corrugated sheet painted in blue colour of size 4 Feet into 12 Feet and 0.5 gauge,Shower Rose 75mm CP Brass,Apex exterior butter cup shade 0336 20 Ltrs Pack,Distemper white 20 Ltrs Pack,PVC Electrical Insulation Tape 10 Mtr — Department of Military Affairs
• LED Luminaire For Floodlight Conforming To IS 10322 (Part 5/Section 5) (V3) (Under BIS Scheme - II),LED Luminaire For Floodlight Conforming To IS 10322 (Part 5/Section 5) (V3) (Under BIS Scheme - II),LED Luminaire For Floodlight Conforming To IS 10322 (Part 5/Section 5) (V3) (Under BIS Scheme - II),Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1),Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1),Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1),Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1),Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1),Moulded Case Circuit Breakers (MCCB) Conforming To IS/IEC 60947 (Part 2),PVC Insulated Copper Cable Single Core and Multi Core Circular Sheathed with Rigid Conductor (V2) ISI Marked To IS 694,PVC Insulated Copper Cable Single Core and Multi Core Circular Sheathed with Rigid Conductor (V2) ISI Marked To IS 694,PVC — Department of Military Affairs

Browse live GeM tenders · Guides for bidders · More from Ministry of Defence · More in Maharashtra · More Sluice valve PN 1 point 6 both side flanged drilled 250mm cast iron body,Motovised actuator ball valve 80mm dia,Twin outlet hydrants valves 100millimetres having 65millimetres outlet with lock pin hydrants valves,PPR Gate valve 50 millimetres Brass Insent of size suitable for 50 millimetre 50mm dia PPR Pipes fit size,Lid covers for 3000 litres tank main hole 15 point 7 inches approved by FDA 100,Motorised actuators Buterfly valves of size 300 mm Motorised actuators Buterfly valves,Motorised actuator suitable for ball valve 100 mm dia,Rubber matting 2 into 1M into 25mm,Cast iron pipe with spigot 150mm,Tee with all flanged of size 100 into 100 into 80 inch conforming IS 1538 Weight 129kgs,3 pole power contractor MNX 32 3 pole power contractor MNX 32,Lid covers suitable for 5000 litres pvc water storage tank 20 Inches,Rubber matting 2x1Mx19mm,Single outlet hydrant valve 100mm having 65mm outlet with lock pin,3 pole power contractor MNX 140,Tee with all socket of size 300 into 300 into 100mm cast iron IS 1538,The tenders