ULTRA MICRO GRAIN CARBIDE END MILL · FLUTE: 4 · CENTER CUTTING · HELIX ANGLE: 30-46 DEGREE · CUTTING DIA: 4 · HELIX ANGLE: 30- 46DEG. · CUTTING DIA: 5. · ULTRA MICRO GRAIN CARBIDE ENDMILL · HELIX ANGL

Open tender on the Government e-Marketplace.

• Buyer: Department of Defence Production
• Ministry: Ministry of Defence
• Category: ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE ENDMILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEG, CUTTING DIA: 8.0MM,ULTRA MICRO GRAIN CARBIDE ENDMILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEG, CUT
• Estimated value: ₹14,79,838
• EMD: ₹7,469
• Bid type: bid
• Published on: 29 Oct 2026
• Closing on: 18 Nov 2026, 05:00 pm IST

Who can bid, EMD and how to apply

• Who can bid: any seller registered on the Government e-Marketplace for ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE ENDMILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEG, CUTTING DIA: 8.0MM,ULTRA MICRO GRAIN CARBIDE ENDMILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEG, CUT. Registered MSEs and DPIIT-recognised startups can claim EMD exemption on this bid.
• EMD: ₹7,469.
• Last date: bids close on 18 Nov 2026, 05:00 pm IST.
• Where to apply: on GeM (bidplus.gem.gov.in). The bid number, documents and buyer details open with a free iBid.Win account.

Similar live tenders

• SOLID CARBIDE END MILL CUTTER 5.24 MM DIA, PARALLEL SHANK, 3 FLUTES 30 DEGREEHELIX, CENTER CUTTING,,SOLID CARBIDE END MILL CUTTER 5.24 MM DIA, PARALLEL SHANK, 3 FLUTES 30 DEGREEHELIX, CENTER CUTTING,,SOLID CARBIDE END MILL CUTTER 5.24 MM DIA, PARALLEL SHANK, 3 FLUTES 30 DEGREEHELIX, CENTER CUTTING,,SOLID CARBIDE DRILL DIA. 5.1 MM WITH TIALN COATING TO SANDVI K CAT. NO. R840-0510-30-WOA 1220 OR ITS E,SOLID CARBIDE DRILL DIA. 5.1 MM WITH TIALN COATING TO SANDVI K CAT. NO. R840-0510-30-WOA 1220 OR ITS E,SOLID CARBIDE DRILL DIA. 5.1 MM WITH TIALN COATING TO SANDVI K CAT. NO. R840-0510-30-WOA 1220 OR ITS E,END MILL CUTTER TO DRG. NO. FS/T-1163D.,END MILL CUTTER TO DRG. NO. FS/T-1163D.,END MILL CUTTER TO DRG. NO. FS/T-1163D. — Department of Defence Production (Items alike: center cutting, carbide end, flute; Same ministry)
• HIGH PERFORMANCE, HIGH HELIX ANGLE SOLID CARBIDE END MILL CUTTER FOR MACHINING OF ALUMINIUM COMPONEN — Department of Defence Production (Items alike: helix angle, carbide end, helix; Same ministry)
• Solid Carbide End Mill (V2) — Department of Space, Kerala (Items alike: carbide end, end mill, carbide)
• Solid Carbide End Mill (V2) — Department of Space, Kerala (Items alike: carbide end, end mill, carbide)
• MICROGRAIN SOLID CARBIDE TIALN COATED CENTRE CUT END MILL DIA 16 MM X SHANK DIA 16 MM X CEL 32 MM X,MICROGRAIN SOLID CARBIDE TIALN COATED CENTRE CUT END MILL DIA 16 MM X SHANK DIA 16 MM X CEL 32 MM X,MICRO GRAIN SOLID CARBIDE CENTRE CUT TIALN COATED END MILL DIA 6 MM X SHANK DIA 6 MM X CEL 24 MM X O,MICRO GRAIN SOLID CARBIDE CENTRE CUT TIALN COATED END MILL DIA 6 MM X SHANK DIA 6 MM X CEL 24 MM X O — Department of Defence Production (Items alike: micro grain, end mill, carbide; Same ministry)

Did you know? More tenders from India Optel Limited · INDIA OPTEL LIMITED Opto Electronics Factory

Same GeM buyer account · 6 open tenders

• MILLING INSERT R390-18 06 12H-PL 1025, INSERT WIDTH: 11, SHAPE CODE: LCE LENGTH: 15.4, WIPER EDGE LENGT,MILLING INSERT R390-18 06 12H-PL 1025, INSERT WIDTH: 11, SHAPE CODE: LCE LENGTH: 15.4, WIPER EDGE LENGT,MILLING INSERT R390-18 06 12H-PL 1025, INSERT WIDTH: 11, SHAPE CODE: LCE LENGTH: 15.4, WIPER EDGE LENGT,MILLING INSERT R39011T308MPM4030, THICKNESS(S) : 3.59MM, RE: 0.8MM, LE: 10MM, BS: 1.2MM, HANDER WIDTH(W1) : 6.8,MILLING INSERT R39011T308MPM4030, THICKNESS(S) : 3.59MM, RE: 0.8MM, LE: 10MM, BS: 1.2MM, HANDER WIDTH(W1) : 6.8,MILLING INSERT R39011T308MPM4030, THICKNESS(S) : 3.59MM, RE: 0.8MM, LE: 10MM, BS: 1.2MM, HANDER WIDTH(W1) : 6.8,TANGENTIALLY CLAMPED MILLING INSERT T490 LNMT 0804PMR, IC808WITH 4 HELICAL CUTTING EDGES, INSERT WID,TANGENTIALLY CLAMPED MILLING INSERT T490 LNMT 0804PMR, IC808WITH 4 HELICAL CUTTING EDGES, INSERT WID,TANGENTIALLY CLAMPED MILLING INSERT T490 LNMT 0804PMR, IC808WITH 4 HELICAL CUTTING EDGES, INSERT WID — Department of Defence Production
• PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 2200 W, CURRENT O TO 160 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 2200 W, CURRENT O TO 160 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 2200 W, CURRENT O TO 160 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 2200 W, CURRENT O TO 160 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 4400 W, CURRENT O TO 480 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 4400 W, CURRENT O TO 480 AMP AND MIN OPERATIN,PROGRAMMABLE DC EL — Department of Defence Production
• SET OF MECHANICAL SPARE FOR 600 TR CENTRIFUGAL CHILLER — Department of Defence Production
• PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 4400 W, CURRENT O TO 480 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 4400 W, CURRENT O TO 480 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 4400 W, CURRENT O TO 480 AMP AND MIN OPERATIN,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 4400 W, CURRENT O TO 480 AMP AND MIN OPERATIN,PROGRAMMABLE DC POWER SUPPLY WITH RATED POWER 1600 W AS PER ANNEXURE - D,PROGRAMMABLE DC POWER SUPPLY WITH RATED POWER 1600 W AS PER ANNEXURE - D,PROGRAMMABLE DC POWER SUPPLY WITH RATED POWER 1600 W AS PER ANNEXURE - D,PROGRAMMABLE DC POWER SUPPLY WITH RATED POWER 1600 W AS PER ANNEXURE - D,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC LOAD OF POWER CAPACITY 0 TO 600 W, CURRENT O TO 60 AMP AND MIN OPERATING,PROGRAMMABLE DC ELECTRONIC L — Department of Defence Production
• SERVICE VISIT OF ENGINEER (S) FROM M/JYOTI CNC AUTOMATION LTD — Department of Defence Production
• PARTING INSERT N123G2-0300-0002-CM 2135, APPL. MTL: PMKNSH, OPERATION: MEDIUM, CUTTING WIDTH(CW) : 3MM, COR,PARTING INSERT N123G2-0300-0002-CM 2135, APPL. MTL: PMKNSH, OPERATION: MEDIUM, CUTTING WIDTH(CW) : 3MM, COR,PARTING INSERT N123G2-0300-0002-CM 2135, APPL. MTL: PMKNSH, OPERATION: MEDIUM, CUTTING WIDTH(CW) : 3MM, COR,PARTING & GROOVING INSERT N123H2-0400-0002-CM 2135, APPL. MTL: PMKNSH, OPERATION: MEDIUM, CUTTING WIDTH:,PARTING & GROOVING INSERT N123H2-0400-0002-CM 2135, APPL. MTL: PMKNSH, OPERATION: MEDIUM, CUTTING WIDTH:,PARTING & GROOVING INSERT N123H2-0400-0002-CM 2135, APPL. MTL: PMKNSH, OPERATION: MEDIUM, CUTTING WIDTH:,INSERT TPUN 160308 THM MAKE: WIDIA/SANDVIK,INSERT TPUN 160308 THM MAKE: WIDIA/SANDVIK,INSERT TPUN 160308 THM MAKE: WIDIA/SANDVIK — Department of Defence Production

Browse live GeM tenders · Guides for bidders · More from Ministry of Defence · More ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEGREE, CUTTING DIA: 4,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE END MILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30- 46DEG. , CUTTING DIA: 5.,ULTRA MICRO GRAIN CARBIDE ENDMILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEG, CUTTING DIA: 8.0MM,ULTRA MICRO GRAIN CARBIDE ENDMILL, FLUTE: 4, CENTER CUTTING, HELIX ANGLE: 30-46 DEG, CUT tenders